Accessories
GROUT
RUSTIC TILES PREMIUM GROUT 25kg
Mortar with the original Rhine Tubag Trass for grouting bricks and tiles facade and clinker, stone cladding and unglazed tiles, ceramic tiles mounted on vertical surfaces – walls facing, fences, posts, etc.
For outdoor use and in interiors. Mortar with very much high adhesion to the edge of the brick and tiles. Contents of the Tubag Trass minimizes the risk of efflorescence, ensures high tightness and vapor permeability of the weld material. Specially selected chippings, binder and pigments ensure stable and durable mortar colors. Easy and economical in processing. After setting has got frost-resistant. Created for grouting of facade tiles with a thickness of min. 8 mm (minimum weld dimensions 10 x 15 mm).
USAGE
For outdoor use and in interiors. Mortar with very much high adhesion to the edge of the brick and tiles. Contents of the Tubag Trass minimizes the risk of efflorescence, ensures high tightness and vapor permeability of the weld material. Specially selected chippings, binder and pigments ensure stable and durable mortar colors. Easy and economical in processing. After setting has got frost-resistant. Created for grouting of facade tiles with a thickness of min. 8 mm (minimum weld dimensions 10 x 15 mm).
Consumption depends on the type of welded elements wall and joint depth, eg. for a 10×10 mm weld, approx. 5.5 kg/m².
AVAILABLE COLOURS
Available colors according to the color palette of clinker mortar:
brown, brick, sand, beige, white, steel, gray, graphite, black.
ADHESIVE
MAPEI ADESILEX P9
High performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials.
TECHNICAL CHARACTERISTICS
Adesilex P9 is a grey or white powder composed of cement, fine-aggregates, synthetic resins and special additives,
developed in the MAPEI Research and Development Laboratories.
Adesilex P9 white is an ultra white powder with excellent workability. A mortar with the following properties is obtained when mixed with water:
• easily workable;
• highly thixotropic; Adesilex P9 can be applied on a vertical surface without slumping or slipping even when heavy tiles are used;
• perfect adherence to all materials normally used in building;
• hardens with minimal shrinkage;
• extended open time.
PACKAGING
Adesilex P9 is available in 25 kg bags and cardboard boxes containing 4 x 5 kg Alupacks.
REPELLENT
PTOTECTGUARD
ProtectGuard has established itself as the benchmark product for preventing degradation of porous materials (concrete, cement, natural or synthetic stone,..) .
- ProtectGuard’s water-repellent properties enable it to prevent water penetration, and thus eradicate the negative effects caused by humidity: water seepage, frost, saltpeter, moss…
- ProtectGuard’s oil-repellent and anti-stain properties block the penetration of greasy stains, atmospheric pollution and prevent the penetration of ink and paint pigments (graffiti).
- ProtectGuard is a water-based eco-friendly product. It is solvent-free and with low VOC content.
ANTI-GRAFFITI PROTECTION
ProtectGuard treatment prevents the penetration of ink and paint pigments into porous materials, thus making it easier and faster to remove graffiti.
PROTECTGUARD FLAT
Protect Guard Flat
ProtectGuard Wet Look Flat Finish is designed to protect mineral porous building materials against water, oil and staining. It protects against the main causes of deterioration such as atmospheric pollution and grease-based stains.
- A surface treated with ProtectGuard Wet Look Flat Finish will be easier to care for and will be protected over time.
- ProtectGuard Wet Look Flat Finish gives treated substrates a flat ‘wet look’ finish that enhances the original colour.
- ProtectGuard Wet Look Flat Finish allows the substrate to remain permeable to air and water vapour. It is UV-resistant and does not yellow.
- ProtectGuard Wet Look Flat Finish can be applied to vertical, horizontal, to all porous or very porous materials such as natural stone, terracotta, brick, concrete, limestone…
ProtectGuard Wet Look Flat Finish is used for new and renovated constructions.
PROTECTGUARD WET LOOK GLOSSY FINISH
ProtectGuard Wet Look Glossy Finish is designed to protect mineral porous building materials against water, oil and staining. It protects against the main causes of deterioration such as atmospheric pollution and grease-based stains.
- A surface treated with ProtectGuard Wet Look Glossy Finish will be easier to care for and will be protected over time.
- ProtectGuard Wet Look Glossy Finish gives treated substrates a glossy ‘wet look’ finish that enhances the original colour.
- ProtectGuard Wet Look Glossy Finish allows the substrate to remain permeable to air and water vapour.
- It is UV-resistant and does not yellow.
- ProtectGuard Wet Look Glossy Finish can be applied to vertical, horizontal, to all porous or very porous materials such as natural stone, terracotta, brick, concrete, limestone…
ProtectGuard Wet Look Glossy Finish is used for new and renovated constructions.
PACKAGING & COVERAGE
2, 5, 10 and 25 litres containers.
Coverage
Per 1 litre:
Terracotta 7.00 m²
Concrete 5.00 m²
Floor tiles 5.00 m²
Interlocking pavement 4.00 m²
Stone cladding 4.00 m²
MPC Type Layer 2.50 m²
Limestone 2.00 m²
Freestone 1.30 m²
St Vaast-type stone 0.60 m²
Average figures given for reference only. The actual quantity of product needed depends on the substrate’s Average figures given for reference only. The actual quantity of product needed depends on the substrate’s porosity.